lorenzofrux150.slatecurrent.com

Choosing a Custom Driveline Shop: Examination, Balance, Custom U Bolts, and Repair Factors To Consider for Work Trucks

Business Name: Anderson Brothers Truck & Equipment
Address: 2640 State Hwy 99 N #1, Eugene, OR 97402
Phone: (541) 688-8686

Anderson Brothers Truck & Equipment

Anderson Brothers Truck & Equipment is a long-established truck parts and repair company located in Eugene, Oregon. Founded in 1949, the business has served the region for more than 70 years, building a reputation as a reliable source for heavy-duty truck parts, custom fabrication, and equipment repair. The company works with commercial vehicle owners, fleets, and equipment operators who need dependable parts and services to keep their trucks operating safely and efficiently.

A core focus of Anderson Brothers is providing specialized services for heavy-duty trucks and equipment. Their shop offers custom driveline fabrication and repair, helping customers build, rebuild, or balance drivelines for a wide range of applications. They also specialize in custom U-bolt bending and fabrication, producing precisely sized components for trucks and other heavy equipment. In addition, the company sells both new and used truck parts, stocking a large inventory and offering local delivery in the Eugene and Springfield areas.

Beyond parts sales, Anderson Brothers provides repair and maintenance services for truck components such as transmissions, differentials, and related systems. Their experienced team focuses on delivering practical, cost-effective solutions that help keep trucks and equipment running reliably. With decades of experience and a commitment to local service, Anderson Brothers Truck & Equipment continues to support the trucking and transportation industries throughout Eugene and surrounding communities.

View on Google Maps
2640 State Hwy 99 N #1, Eugene, OR 97402
Business Hours
  • Monday: 7:30 AM–6 PM
  • Tuesday: 7:30 AM–6 PM
  • Wednesday: 7:30 AM–6 PM
  • Thursday: 7:30 AM–6 PM
  • Friday: 7:30 AM–6 PM
  • Saturday: 8 AM–2 PM
  • Sunday: Closed
  • Follow Us:
  • Facebook: https://www.facebook.com/andersonbrotherseugene
  • Instagram: https://www.instagram.com/andersonbrotherste/


    Work trucks make their keep under load, not on stands. When vibration begins sneaking in at 45 to 55 miles per hour, when a center provider groans on launch, or a yoke slings grease and dust like confetti, productivity falls off a cliff. A great driveline shop keeps your iron moving. The difference in between a capable shop and a careless one is the difference between a week of callbacks and a year of quiet miles. If you spec and service fleets, or you run a single-ton dump that needs to begin every cold morning in January, you appreciate who touches your driveline.

    This guide concentrates on inspection, balance, Custom U Bolts, and repair choices with the truths of work trucks in mind. The details matter. Drivelines reside in a geometry issue that changes with every load, every suspension tweak, and every used bushing. The right shop comprehends that and behaves accordingly.

    What quality looks like in a driveline shop

    The finest driveline attires are part factory, part diagnostic lab. They determine twice, document angles, and ask questions about how the truck actually works. A respectable store is tidy where it counts. Their balancers are clean and kept, their V-blocks hold true, and you can see old shafts tagged by customer and condition. You will see yoke protectors on ended up pieces, labels on tubing sizes, and a rack of weld yokes and slip stubs that cover the typical service classes from light-duty half heaps to Class 7 and 8.

    Staff is the most significant tell. If the counter individual asks for running angles and wheelbase instead of simply a VIN, you are in excellent hands. If a tech strolls the truck with you, takes a look at axle wrap evidence on the springs, and notes a dented tube half-hidden by an exhaust heat guard, better still. I trust stores that can describe why a double cardan was picked for a raised service body F-350, and why a long single-piece may be the better route for a Class 6 box truck with a low trip height and a long wheelbase. There are compromises, and they will say them out loud.

    The stakes for work trucks

    A buzzing driveline is more than a convenience problem. Vibration chews through u-joints and pinion seals, loosens up fasteners, and fatigues tubes. On multi-piece drivelines, a stopping working center assistance bearing can turn a basic service visit into a crossmember and floor repair if it lets go at speed. Downtime expenses rapidly accumulate: one day off a task for a pail truck or a dump can cost numerous thousand dollars in between lost billable hours and rescheduling. Invest a bit more in advance on a shop that examines appropriately, and you buy back quiet, safe miles and less roadside headaches.

    Inspection that surpasses the bench

    You can detect quite a bit before you ever pull the shaft. Initially, a road test tells the speed at which the vibration appears, which hints at whether it is first-order driveshaft speed, tire speed, or an engine harmonic. If the vibration comes in constant at a particular miles per hour throughout all equipments, it frequently points at the shaft. If it reoccurs with throttle input, look at pinion angle modifications and u-joint brinelling.

    Under the truck, try to find witness marks. Brilliant rings at the u-joint caps recommend spinning caps due to loose straps or improperly sized bearing caps. Rust dust at the cups is a free gift for dry joints. A wet band around television a foot from the weld can hide a minor damage that changed wall density, which will toss balance off even if runout measures partially within specification. A good store will clean the tube, dial it up in V-blocks, and inspect total showed runout along multiple points, not simply at the ends.

    On two-piece drivelines, a center carrier bearing makes complex the photo. The rubber isolator can look fine at rest, yet collapse under torque. I like stores that pry the carrier carefully to imitate load, looking for extreme motion or rubber tearing. The bearing itself ought to spin without gritty feel. If you have a truck that tows heavy or carries a crane body, the carrier sees more whipping than the spec sheet anticipates. Replacing it preemptively while the shaft is down is typically cheaper than repeating labor later.

    Measuring and documenting angles

    Geometry ruins more driveshafts than bad parts. A solid shop documents angles and sets a target based upon the truck's purpose. They will position an inclinometer on the transmission output, the driveshaft tube, and the pinion yoke. On multi-piece shafts, they do the exact same on both areas and reference the carrier bracket to the frame. The goal is typically 1 to 3 degrees of running angle at each joint with parallel or near-parallel output and pinion lines, remedying for engine install droop and rear suspension habits. A lifted work truck that still hauls heavy product typically needs a different plan than a shopping center crawler. More angle equates to more speed variation in the joint, which requires to be canceled by an equivalent and opposite angle in other places. Miss this, and you will chase phantom vibrations for weeks.

    Shops that construct for fleets often make simple adjustable shims or recommend pinion wedges to satisfy angle targets. You might hear them suggest a double cardan in the front of a four-wheel-drive chassis if the drop from transfer case to front differential is extreme. In the rear of a heavily loaded truck with a leaf spring pack, they may plan for crammed angles to be a little various than unloaded ones. That is sincere attention to use case, not a one-size answer.

    Balance is not just a machine reading

    Dynamic balancing on a modern-day balancer is essential, however it is not the whole video game. A shaft can be perfectly balanced at the incorrect angle set or with a stiff slip that binds under torque, and the truck will still shake. Excellent shops examine runout, stage, and spline fit before they spin the shaft. They mark all yokes and tube ends so reassembly lands in the same clocking. If they re-tube, they align yokes exactly in phase and confirm weld integrity and straightness before stabilizing. When the balancing weights go on, they must utilize tack welds and last welds that do not overheat and misshape the tube.

    Balance specs differ by service class. For light-duty trucks, you typically see tolerances on the order of a couple of gram-inches. For heavy shafts, the outright numbers are larger, but the principle is the very same: attain smooth operation across the typical operating rpm range. A shop that asks your cruising speeds, PTO rpm, and whether the truck hangs out in low variety shows they comprehend the window they must strike. Years earlier, I saw a balancer tech add 2 small weights 180 degrees apart to fine tune a shaft destined for a municipal sewer jetter truck that sat at 2,400 shaft rpm for extended periods. They checked it at that target rpm rather than simply at a basic low speed, which conserved the city team a great deal of cabin buzz.

    Material choices, yokes, and functional components

    Truck drivelines are not glamorous, however the parts menu matters. Tubes are available in several diameters and wall thicknesses. A longer wheelbase service truck with a welder and crane perched aft requires adequate tightness to prevent critical speed concerns. A great store will calculate or a minimum of recommendation vital speed guidelines and will recommend upsizing tube diameter or wall thickness if the present develop is limited. They may even recommend transforming a long single-piece shaft to a two-piece with a carrier to raise the safe operating rpm margin.

    U-joints are available in different series with needle bearing counts and bearing cap sizes matched to the torque load. Off-brand joints with careless tolerances will wind up costing more. For work trucks, I choose premium joints with strong crosses and zerk fittings where useful, however sealed durable joints have their place in mud and grit if maintenance compliance is poor. The shop must ask how your trucks are greased and at what periods. If they never ever see a grease gun, sealed might outlast disregarded serviceables.

    Carrier bearings, slip yokes, flange yokes, and splines all should have attention. Excessive play at the slip will mimic an out-of-balance shaft. Rusty or galled splines bind, which loads joints unpredictably. If a yoke is pitted at the seal surface, replacing it while the shaft is down saves a comeback for a leakage. Excellent stores stock the typical Truck Parts that wear the most: u-joints in the typical 1310, 1330, 1350, 1410, 1480 truck parts series and their durable variants, provider bearings for popular fleet chassis, and weld yokes and tube yokes that match OEM dimensions.

    Custom U Bolts and appropriate clamping

    Loose or misfit U-bolts destroy new work. Axle U-bolts hold leaf packs to the axle and indirectly control pinion angle under load. Worn, extended, or incorrect-diameter U-bolts permit the axle to walk on the spring pack, altering angles and causing vibration. On top of that, yoke strap bolts and U-bolts at the pinion yoke demand accurate torque and clean threads to prevent spinning caps.

    A shop that offers Custom U Bolts can save a day or more when a truck is debilitated. They bend from quality rod stock, cut threads easily, and match bend radii to the spring perch. If you have non-standard spring packs or an aftermarket axle swap, this service is necessary. You ought to see them take measurements, confirm leg length and inside width, and ask about torque specifications. For a medium-duty truck, U-bolt torque numbers can strike triple digits in foot-pounds, and re-torque after 100 to 500 miles is not optional. An appropriate store will highlight that and, if they are setting up, will paint-mark nuts so you can see if anything backs off throughout early use.

    Repair or replace: finding the inflection point

    Not every shaft should have a complete rebuild. Sometimes a basic re-balance and fresh joints suffice. Other times a re-tube is smarter. The choice rests on a couple of truths: tube condition, yoke wear, service history, and expense versus downtime. If a tube has a crease, even shallow, I lean toward replacement. Creases focus tension and tend to split later. If yokes are egged or the bearing cap bores have actually lengthened, you will chase after cap spin no matter how tight you torque. Replace the yokes because case, or keep a spare shaft all set to go.

    On older fleet trucks that see salt, replacing the slip stub and spline can bring back a lot of lost smoothness. You can feel the difference when the slip moves like it should. A shop with an affordable stock can typically turn a re-tube and new slip in a day. Complete custom or unusual flanges can extend that to a number of days while parts ship. I keep a spare shaft for the worst culprits in a fleet because pulling a spare from the rack beats waiting when a bearing takes off midweek.

    Turnaround, logistics, and communication

    Time is a resource. A store that guarantees the world without requesting context makes me nervous. For a standard u-joint and balance on a one-piece shaft, very same day is typically possible if you call ahead. For a two-piece with provider and yoke replacement, next day is realistic. Fully custom constructs, oddball flanges, or hard-to-source weld yokes can take three to 5 service days. If a shop discusses this in advance, you can plan truck rotations.

    I appreciate stores that label shafts with orientation arrows, u-joint series, and torque specs on the return. Easy directions reduce set up mistakes. Some write angle targets on the work order and hand you a copy. When there is a suspected angle problem on the truck, they might send out a tech out with an angle finder to validate, or they will coach your mechanics through the measurements by phone. That level of communication reduce misdiagnosis and conserves both sides a headache.

    Field measurement done right

    If you are ordering a custom shaft or altering wheelbase, the measurements you bring to the shop drive the construct. Getting it incorrect by even half an inch can lead to inadequate spline engagement or bottoming the slip under compression. A determined, repeatable approach matters.

    Use a great tape, get the truck on its weight, and if you can, load it the method it normally runs. Measure from the face of the transmission output seal to the centerline of the rear u-joint cap, or from flange face to flange face if your truck uses flange design connections. Take angles at each yoke so the shop can anticipate running angles. On two-piece shafts, measure from flange to provider mount and after that provider to pinion. If your leaf springs are worn out and arch modifications under load, tell the shop; they can factor that into slip length and angle choices. A little extra spline travel can conserve you from bottoming out when you struck a pothole while loaded.

    The economics: what you need to anticipate to spend

    Numbers differ by region and supply, but general varieties help preparation. A balance and u-joint replacement on a light-duty one-piece shaft might run a few hundred dollars, depending upon joint quality. Re-tubing with new weld yokes and a fresh balance can extend into the mid hundreds. Include a carrier bearing and you will see a bit more labor and parts cost. On medium-duty equipment, bigger series joints and much heavier tube increase prices. Custom U Bolts are generally a modest line item, however they are important when you require them exact same day. I avoid the least expensive parts bin. A failed deal u-joint on a crammed truck in traffic is a bad trade.

    Downtime expenses more than parts most days. If a slightly greater parts costs purchases reliability and a warranty you can implement, it often pencils out. Some shops use fleet pricing or focus on industrial accounts. If you bring them constant, clean measurements and install their work carefully, they will prioritize you when something urgent pops up.

    Real-world examples that show the choices

    A local rake truck came in with a stable 50 miles per hour vibration that did not alter with gear. Tires were new, and the axle had actually recently been re-geared. The shop discovered the rear pinion angle at nearly 7 degrees nose down, likely from years of work and an extra spreader mounted aft. They set it to about 2.5 degrees with wedges, re-balanced the rear shaft, and replaced the carrier. The truck ran peaceful for the remainder of the season. Without the angle repair, they would have eaten through joints once again by February.

    A cable service bucket truck had actually repeated rear u-joint failures. Two times the shop changed joints and re-balanced. The 3rd time, they discovered the yoke bores were a little out of round. New yokes and a slip stub resolved it. Cheap joints were part of the earlier failures too. They changed to a premium 1480 series joint and saw no additional concerns for more than a year and approximately 25,000 miles of stop-and-go service.

    A landscaper lifted a three-quarter-ton pickup and converted to bigger tires. The angle at the rear joint increased, and a light shudder started on takeoff. The driveline shop advised a double cardan at the transfer case and changed the rear pinion to aim more closely at the rear area of the shaft. Balance alone would not have actually resolved it. As soon as geometry matched the hardware, the shudder went away.

    When to include the store before you modify

    Suspension modifications, PTO setups, longer wheelbases for energy bodies, and axle swaps all impact driveline behavior. Before you dedicate to a new spring pack or a frame stretch, speak to the driveline store you trust. They can sketch out how your choices effect angles and critical speed. In some cases the option is uncomplicated: upsize tube, split the shaft, or plan for a different yoke. Other times a small change in advance conserves you from chasing a persistent vibration later. If you are including a hydraulic pump PTO that performs at a set rpm for hours, inform them that number so they can balance the shaft in that window.

    The indicators you have the right partner

    Shops that do it ideal are foreseeable. They ask how the truck works in real life, not just what it is. They balance with intent, measure with care, and stock the Truck Parts that matter for your fleet. They build Custom U Bolts without drama and hand you hardware that fits. Their invoices and tags check out like a record you can use later on, noting u-joint series, tube size, and any angle notes. And when something goes sideways, they respond to the phone and help you fix it rather than blame the truck or the driver.

    Here is a brief, useful checklist you can use when hunting a driveline shop for work trucks:

    • Do they determine and record running angles, not just balance the shaft?
    • Can they describe tube size and vital speed options in plain language?
    • Do they equip common u-joint series, provider bearings, and yokes for your service class?
    • Will they fabricate Custom U Bolts to spec and supply proper torque guidance?
    • Do they use useful turn-around times and communicate parts lead times honestly?

    Installation discipline in your own shop

    Even the best driveline will not endure careless set up work. Tidy the yoke tires. Use new straps or correctly torqued U-bolts. Do not hammer caps into place; utilize a press or vise to seat them squarely. Make certain the slip stub is fully engaged to a safe depth, with adequate travel left for suspension compression. If your shop paints index marks, line them up. After set up, a quick road test on a known path at common cruise speed confirms the fix. I ask drivers to note specific speeds that feel smooth or rough. Those information assist if you require to circle back.

    Re-torque U-bolts holding axles to springs after the first hundred miles approximately. I have seen brand new spring loads shift a little under first heavy loads and alter pinion angle by a degree or more. A quick re-check catches those early shifts before they create a complaint.

    Questions to ask before licensing work

    You do not require to be a driveline engineer to make great choices. A couple of targeted questions unlock clarity.

    • What are my operating angles now, and what are you targeting?
    • Will you re-tube or try to straighten, and why?
    • What u-joint series and brand name are you installing?
    • What is the slip engagement at trip height, and how much travel is left?
    • Can you balance at a specific rpm that matches my cruise or PTO speed?

    The answers need to be matter-of-fact. If a store dodges or speaks in vague terms, keep moving.

    Warranty and the value of recorded work

    Shops that support their work deal clear, written service warranties connected to parts and labor. They generally exclude abuse and contamination, which is fair. What makes the guarantee beneficial is good documents. If they recorded angles, joint series, and tube size, you both have a standard. If a failure takes place, it is easier to figure out whether something altered in the truck or if a part just stopped working too soon. Fleets that keep those records alongside lorry maintenance logs find service warranty claims smoother and trust grows on both sides.

    Sourcing, parts quality, and supply chain reality

    Recent years have taught everyone that supply chains flex and break. A smart store diversifies sources without compromising quality. They know which u-joint lines hold up under rake duty and which carrier bearings endure grit and brine. If a particular weld yoke is months out, they might propose a common-flange conversion with matching bolt pattern and pilot to keep you moving, and they will explain any trade-offs. Prevent mystery-brand joints and bearings unless downtime forces your hand. Conserving twenty bucks on a joint that stops working in 2 months is not savings.

    Final thoughts from the field

    I have seen brand-new shafts drew back for rework due to the fact that a truck left on unequal tire pressures vibrated hard adequate to mask the genuine concern. I have seen completely well balanced assemblies rattle on launch because a torn transmission mount enabled the output to swing. The driveline never ever lives alone. An excellent shop knows where its borders are and when to suggest a suspension or install inspection before they bonded anything.

    Choose partners who respect measurement, who construct easily, and who interact clearly. Provide the information they need: reasonable loads, typical speeds, and the peculiarities of your paths. Let them provide the ideal parts, from quality joints to Custom U Bolts that actually fit. Your trucks will run quieter, your crews will grumble less, and your calendar will hold less unscheduled stops. That is the return on doing driveline work the ideal way.

    Anderson Brothers Truck & Equipment is located in Eugene, Oregon
    Anderson Brothers Truck & Equipment was founded in 1949
    Anderson Brothers Truck & Equipment serves commercial truck owners
    Anderson Brothers Truck & Equipment serves fleet operators
    Anderson Brothers Truck & Equipment provides heavy-duty truck parts
    Anderson Brothers Truck & Equipment provides truck equipment repair services
    Anderson Brothers Truck & Equipment specializes in driveline fabrication
    Anderson Brothers Truck & Equipment performs driveline repair
    Anderson Brothers Truck & Equipment offers custom U-bolt bending
    Anderson Brothers Truck & Equipment manufactures custom U-bolts
    Anderson Brothers Truck & Equipment sells new truck parts
    Anderson Brothers Truck & Equipment sells used truck parts
    Anderson Brothers Truck & Equipment maintains heavy-duty trucks
    Anderson Brothers Truck & Equipment repairs truck transmissions
    Anderson Brothers Truck & Equipment repairs truck differentials
    Anderson Brothers Truck & Equipment supports the trucking industry
    Anderson Brothers Truck & Equipment operates in Lane County, Oregon
    Anderson Brothers Truck & Equipment provides parts delivery services
    Anderson Brothers Truck & Equipment supplies components for heavy equipment
    Anderson Brothers Truck & Equipment serves customers in Eugene and Springfield, Oregon
    Anderson Brothers Truck & Equipment has a phone number of (541) 688-8686
    Anderson Brothers Truck & Equipment has an address of 2640 State Hwy 99 N #1, Eugene, OR 97402
    Anderson Brothers Truck & Equipment has a website https://andersonbrotherste.com/
    Anderson Brothers Truck & Equipment has Google Maps listing https://maps.app.goo.gl/ta67Qi9fc5DCZZzp7
    Anderson Brothers Truck & Equipment has Facebook page https://www.facebook.com/andersonbrotherseugene
    Anderson Brothers Truck & Equipment has an Instagram page https://www.instagram.com/andersonbrotherste/
    Anderson Brothers Truck & Equipment won Top Driveline and Truck Part Company 2025
    Anderson Brothers Truck & Equipment earned Best Customer Service Award 2024
    Anderson Brothers Truck & Equipment was awarded Best Custom U Bolts 2025

    People Also Ask about Anderson Brothers Truck & Equipment


    What does Anderson Brothers Truck & Equipment do in Eugene, Oregon?

    Anderson Brothers Truck & Equipment is a Eugene-based truck parts and repair company that provides custom U-bolt bending, driveline repair and replacement, new and used truck parts, and other medium- and heavy-duty truck services. They have served the area since 1949.

    Where is Anderson Brothers Truck & Equipment located?

    Anderson Brothers Truck & Equipment is located at 2640 Highway 99 N, Eugene, Oregon 97402. Our website also lists phone number (541) 688-8686 and business hours for local customers needing parts or repair service.

    How long has Anderson Brothers Truck & Equipment been in business?

    Anderson Brothers has been serving Eugene since 1949. The business is a long-established local provider of truck parts, fabrication, and repair services.

    Does Anderson Brothers Truck & Equipment sell new and used truck parts?

    Yes. Anderson Brothers sells both new and used truck parts for medium- and heavy-duty vehicles. We focus on parts categories such as brakes and drums, wheel shafts, Baldwin filters, straps and tie downs, exhaust parts, and other accessories.

    Does Anderson Brothers Truck & Equipment offer local truck parts delivery?

    Yes. The company offers local delivery for truck parts in Eugene and Springfield, and our truck parts page also notes delivery to Eugene, Springfield, and surrounding areas.

    What driveline services does Anderson Brothers Truck & Equipment provide?

    Anderson Brothers specializes in custom driveline solutions, including driveline replacement, drive shaft repair, and precision fabrication. These services are available for heavy trucks, cars, and pickup trucks.

    Can Anderson Brothers Truck & Equipment make custom U-bolts?

    Yes. We offer custom U-bolt bending in Eugene and can produce U-bolts in different lengths, widths, thread sizes, and thicknesses. We can bend both round and square U-bolts depending on the application.

    What truck repair services does Anderson Brothers Truck & Equipment offer?

    We perform repair and maintenance work for medium- and heavy-duty trucks, including flywheel resurfacing, oil changes, brake services, suspension repair, and king pin replacement. We work to reduce downtime and keep trucks performing at their best.

    What truck brands does Anderson Brothers Truck & Equipment service and supply parts for?

    Anderson Brothers says it services and supplies parts for major truck and equipment brands including Freightliner, Kenworth, Peterbilt, Mack, Volvo, and Cummins, among others.

    Who owns Anderson Brothers Truck & Equipment?

    Anderson Brothers is now led by the Weld Family, who also own Buck’s Sanitary Services and Royal Flush Environmental Services. The current ownership remains focused on serving Eugene and the surrounding community.

    Where is Anderson Brothers Truck & Equipment located?

    The Anderson Brothers Truck & Equipment is conveniently located at 2640 State Hwy 99 N #1, Eugene, OR 97402. You can easily find directions on Google Maps or call at (541) 688-8686 Monday through Friday 7:30am to 6:00pm, Saturday 8:00am to 2:00pm. Closed Sundays.


    How can I contact Anderson Brothers Truck & Equipment?


    You can contact Anderson Brothers Truck & Equipment by phone at: (541) 688-8686, visit their website at https://andersonbrotherste.com/ or connect on social media via Facebook or Instagram



    While exploring the exhibits at the Lane County History Museum, many drivers know they can find nearby support for Drivelines repair, Custom U Bolts manufacturing, and quality Truck Parts.